Crippling Depression/Blue Screen of Death

Overview
Crippling Depression is a featherweight combat robot made the Youtuber Robert Cowan. It can be made by using a Witch Doctor V1 chasis and making various modifications listed below.

Construction

 * 1) Make sure you have a Witch Doctor V1 chasis (It's the one that's shaped like a box)
 * 2) Download this file and 3D print it. Make sure it is scaled to the right size and is thin enough to fit on the weapon motor.
 * 3) Remove the lexan panel on the top of the bot
 * 4) Take out the front wedge, and the weapon of the bot. As well as all the gears and the weapon motor. DO NOT BRAKE THE WIRES OF THE WEAPON MOTOR (You'll also need to remove fin like objects on either side of the weapon)
 * 5) Mount the motor in the space where the weapon assembly was facing upward. If you're gluing it in place be careful not get glue on the wires.
 * 6) Attach the gear that was on the weapon motor to the disc. Preferable where the hole for a shaft is like pictured on the pinshape page.
 * 7) Screw The lexan top back on and make sure all wheels are working fine
 * 8) Troubleshoot if necessary
 * 9) Either simply slide the disc on to the shaft of the weapon motor (gear first), or put a little glue on then mount it.
 * 10) If you want it to be able to run run as an overcutter and undercutter you'll need to glue larger wheels on to the existing ones for higher ground clearance.
 * 11) Add side panels and color accordingly to make the robot look more accurate
 * 12) If everything is working enjoy!

Extra note:

The disc is prone to flying off, so make sure you're at a safe distance when it's operating

Builders

 * Theo Hummel (Crippling Depression)
 * Khaotic Robotics (Ribbot)

Strategy as
Pretty much go full frontal all the time unless you're up against a flipper. In that case be a little more cautious and try to avoid their weapon

Strategy Against
Try to either stop them from maximizing their spin up time or disable their weapon.